3Com SuperStack 3 NBX Administrator's Manual page 280

280 C 3: D
HAPTER EVICE
C
ONFIGURATION
3 Click Apply.
4 Select the board (ISDN PRI) for which you want to change the IP settings.
5 Click IP Settings (Figure 108).
If there is no IP Settings button in the dialog box, you have not yet
installed the IP licenses. You must install them before you can proceed.
Figure 108 Digital Line Card IP Settings Dialog Box
6 To assign IP addresses automatically, enter the first address in the
First IP Address field. The system sequentially adds the remaining
addresses.