3Com SuperStack 3 NBX Administrator's Manual page 244

244 C 3: D
HAPTER EVICE
C
ONFIGURATION
To verify that the span status changes from Offline to Ready:
1 On the Digital Line Cards tab, select ISDN BRI Span List from the Select
Device Type list and then click Apply.
2 Enable the On Line check box.
3 Click Apply.
4 Verify that the word Ready appears in the ISDN BRI Span List line item
that corresponds to this span.
The Digital Line Cards dialog box includes buttons named Config & Status
Report and Export Report. Both of these buttons generate configuration
and status information for the selected Digital Line Card. Because this
information is used for troubleshooting purposes, these buttons and the
generated reports are described in "Digital Line Card Troubleshooting" in
Chapter 10.
Configuring BRI Groups
To configure the BRI groups:
1 On the Digital Line Cards tab, from the Select Device Type list, select ISDN
BRI Group List and then click Apply.
2 From the ISDN BRI Group List, select BRI Group 1.
3 Click Modify. The Modify Group dialog box appears (Figure 82).
Figure 82 Modify Group Dialog Box