Regional Settings - 3Com SuperStack 3 NBX Administrator's Manual

334 C 5: S
HAPTER YSTEM

Regional Settings

C
ONFIGURATION
Table 51 System Settings System-wide Dialog Box Fields (continued)
Field
IP VLAN Tagging
Enabled
System-wide CLIR
Music On Hold
Music on Transfer
One Button
Transfer
NBX Messaging
Third-Party
Messaging
Pulse Dialing
After you install regional software and components from the regional
packs, you can enable regional settings. To enable these regional settings
in the NBX NetSet utility, you select the appropriate country and language
for the system voice prompts, the technical tones and cadences, and the
online user documentation.
To enable regional settings, select System Configuration > System
Settings > Regional Settings. See the Help for the procedure on enabling
regional settings.
See "Regional Software" in Chapter 7 for information on installing
regional packs.
Purpose
If you enable the IP VLAN Tagging Enabled check box, the NBX
system VLAN tags outgoing voice and control packets
intended for devices on the VLAN you specified in the Virtual
LAN ID text box.
Suppresses the transmission of caller ID for outgoing calls.
Enables Ethernet multicasts for Music On Hold (MOH). MOH is
automatically enabled if Music on Transfer is enabled.
MOH Audio should be enabled only if you have a MOH device
connected to the system.
Enables MOH audio for Call Transfer; requires MOH to be
installed and enabled. Music on Transfer is automatically
disabled if MOH is disabled.
Enables system users to transfer a call by pressing the Transfer
button only once. If this box is not checked, call transfers
require users to press the Transfer button once to start the call
transfer and another time to complete the transfer of the call.
Allows you to enable or disable NBX Messaging after you
install a third-party messaging license. By default, this
checkbox is selected but not accessible until you install a
third-party messaging license. If you disable NBX Messaging by
clearing this checkbox, all NBX Messaging icons and headings
become inactive throughout the NBX NetSet utility.
This check box is active only if you have installed a third-party
messaging license. You can enable the third-party messaging
application by selecting this check box or by clearing the NBX
Messaging check box.
Enables pulse dialing for all telephones in the system.