Verifying The G.723 Converter; Checking Service Pack (Windows Nt Only); Configuring Licenses - 3Com SuperStack 3 NBX Administrator's Manual

Verifying the
G.723 Converter
Checking Service Pack
(Windows NT Only)

Configuring Licenses

Installations that need G.723.1 audio compression require access to a
converter in Microsoft NetMeeting 2.1 or 3.01. NetMeeting must be
installed on the same PC that holds the ConneXtions software, but the
two cannot run simultaneously.
G.723.1 does not appear as a selectable option in ConneXtions unless the
converter is accessible.
To confirm that the convertor is present, search for the msg723.acm file
on your hard drive or download it from the Microsoft web site.
If you are using Windows NT 4.0 to run the ConneXtions software, you
require Service Pack 4 (or higher).
To verify that you are running Service Pack 4:
1 On the Start menu, select Programs > Administrative Tools (Common).
2 Select Windows NT Diagnostics, and click the Version tab.
3 Verify that the NT version is 4.0 with Service Pack 4 or later. If it is not,
download the latest version from the Microsoft web site.
To configure licenses, you must enter system information, such as the
number of H.323 ports that you want to install. You can find this
information through the NBX NetSet utility.
You can purchase licensed keycodes to unlock additional ports. A license
provides a software key that unlocks ports that are already loaded. You
can purchase licenses to enable or upgrade a system to 1, 2, 4, 8, or 16
ports on an NBX 100 system, or to 1, 2, 4, 8, 16, 32, 64 or 100 ports on
a SuperStack 3 system. Software keys are tied to the system serial
number.
To configure licenses:
1 Log in to the NBX NetSet utility:
a Open your browser and connect to the Call Processor by using its IP
address (example: 192.168.1.190) or host name (example: Home).
b Click Administrator.
c Enter your username and password.
d Click OK.
Preparing for Installation 419