3Com SuperStack 3 NBX Administrator's Manual page 191

Table 29 Device Status Fields (continued)
Field
Name (Device Name)
Extension (Associated
Telephone)
Dialog Refresh
Device Refresh
Reset Device
Status
Software Version
Time Last Seen
Error Count,
Error Code,
Performance Data,
Debug Data,
Actor Data
Configuring the NBX 1105 Attendant Console
Purpose
(Optional) A name that identifies this device when it
appears in lists in the NBX NetSet utility.
The telephone extension associated with this Attendant
Console.
How often to renew the information that appears on this
dialog box.
Choices: Manual; 5 10, 15, 30, or 60 seconds.
Forces the device to send a status message to the Call
Processor. (If you select this setting, you must click the
Apply button to make the change take effect.)
Reboots the Attendant Console. Rebooting renews the
Console's communications with the Call Processor and
causes the Attendant Console to receive a new
download of its operating software.
CAUTION:
If the device has an active call, then Reset
Device disconnects the call.
The state of the device as of the last Dialog Refresh.
Online: The device was available.
Offline: The device was not available the last time that
the Call Processor tried to set up a call with this device.
Unknown: The device has not communicated with the
Call Processor during the previous 5 minutes.
The software version downloaded to the device.
A timestamp identifying the last time the device
communicated with the Call Processor. During normal
operations, the Call Processor gathers status information
from each device every 30 seconds.
Advanced diagnostic data for use by technical support
personnel.
191