Operations Management - 3Com SuperStack 3 NBX Administrator's Manual

374 C 6: NBX M
HAPTER
Operations
Management
ESSAGING
Table 65 VPIM Tab Fields (continued)
Field
Max number of send attempts
The Operations Management dialog box allows you to manage the
queue of outgoing voice mail messages.
To select queue management parameters, select NBX Messaging > VPIM
> Operations Management. See the Help for procedures on configuring
queue management parameters.
Table 66 contains a list of the fields within this dialog box along with a
description of their purpose.
Some commands require that operations be stopped or started. For
example, to remove a message from the queue, you must first stop
operations. Similarly, unless you start operations or they are currently
running, you cannot use the "Send all messages now" command.
Table 66 Operations Management Dialog Box Fields
Field
Operations status
Number of outgoing
messages
Time Waiting
# Attempts
Sender
Purpose
To change the number of times the NBX system
attempts to connect to the target system, modify
the number (default is 4 attempts) in this text box.
If the NBX system is unsuccessful in contacting the
target system after the specified number of send
attempts, the voice mail message is returned to the
sender's voice mail box along with an indication
that the message could not be sent.
Default: 4 attempts
Minimum: 1 attempt
Maximum: 10 attempts
Purpose
The status of the queue of outgoing voice mail messages.
Possible values: Ready, Starting, Processing, Stopped
The number of messages in the outgoing queue when this
dialog box was last accessed or refreshed.
The time that the voice mail message has been waiting in
the queue.
The remaining number of attempts to send the message.
The IP address and extension of the user who sent the voice
mail message.