3Com SuperStack 3 NBX Administrator's Manual page 398

398 C 10: T
HAPTER ROUBLESHOOTING
Table 72 LUI Menu Items — Business and Basic Telephones (continued)
Option Name
4 Set Gatwy IP
5 Set NCP IP
6 Test – Run Ping H3/IP
7 Test – LEDs
8 Test – LCD
9 Test – Buttons
Description
Lets you specify the IP address of the default gateway for
this subnetwork.
Lets you specify the IP address of the Network Call
Processor (NCP). In all but special circumstances, the
system status messages communicate this information.
When entering an IP address:
Use the key pad to enter digits 0–9.
■
Use the left and right soft keys to move the cursor left
■
or right.
Press the # key to commit your address change.
■
To exit without saving any changes:
■
On the NBX Business Telephone, press Program.
On the NBX Basic Telephone, press the MSG button.
To change a telephone back to its default setting, enter
all Fs for the NCP IP address.
For use only by a qualified 3Com service person. Contact
3Com before using this test.
On the NBX Business Telephone, turns on all LEDs for
5 seconds. Lets you quickly check for inoperative lights.
NOTE: On the NBX Basic Telephone, turns on the icons
and words on the right side of the display panel for 5
seconds.
Icons: Telephone icon plus the number 1 (top line) and
telephone icon plus the number 2 (bottom line)
Words: FWD (top line) and IN (bottom line)
Illuminates every pixel on the display for 5 seconds.
Puts the telephone in the button test state. Press any
telephone button to hear a tone and see a description of
the button's function.
To return to the main menu:
On the NBX Business Telephone, press Program twice.
■
On the NBX Basic Telephone, press MSG twice.
■