Installing Connextions - 3Com SuperStack 3 NBX Administrator's Manual

Installing
ConneXtions
To install the NBX ConneXtions H.323 Gateway:
1 Insert the Resource Pack CD into the PC. Click NBX Applications, and
then click NBX ConneXtions, and then click OK .
If the program does not start automatically, click the Windows Start
menu, and then Run. Type D:autorun, substituting the letter of your
CD-ROM drive for D, and click OK.
2 Respond to these initial InstallShield dialog boxes:
a In the Welcome dialog, click Next.
b In the License Agreement dialog, click Yes.
c In the Default Destination Location dialog, click Next or browse for an
alternative destination location.
d In the NBX license request dialog, click Yes. This confirms that the NBX
system is legal.
3 Specify the Audio Channel Format:
a Select first option (G.711 only) for uncompressed connections
b Select one of the other two options to configure G.723.1 connections.
These options require the file
G.723 Converter" earlier in this appendix.
4 Information Block - click OK.
5 Specify the number of configured H.323 ports for this ConneXtions
gateway. 3Com recommends that licenses are allocated equally when
using multiple gateways.
6 Optionally, specify a Caller ID Label by entering an outgoing caller
ID notification label of up to 33 digits. Enter numbers only, no other
characters or spaces.
Example:
9787490000
(The Caller ID shows the caller's extension number followed by the
if the entry is left blank.)
[User Name]
7 Specify the Call Processor name. Enter the name H.323 callers see when
they reach the Auto Attendant.

Installing ConneXtions

. See "Verifying the
msg723.acm
421