3Com SuperStack 3 NBX Administrator's Manual page 35

Hide thumbs Also See for SuperStack 3 NBX:

Table of Contents

Figure 2 Dial Plan Command Format

Leading Digits to Collect

Table Entry ID Number

Table ID Number

Table Create 1 Internal

TableEntry Create

Table Create 2 Incoming

TableEntry Create

Table Create 3 Least Cost Routing

TableEntry Create

Table 6 Dial Plan Command Fields

Table ID Number

Table 6 describes each field of a dial plan command.

Command name. For example, TableEntry Create is the command that make Class of Service

and call routing decisions based on the correspondence of dialed digits and table entry digits.

See "Dial Plan Configuration File Commands" later in this chapter for a description of each

Table ID number. This is always 1 for the Internal dial plan table, 2 for the Incoming dial plan

table, and 3 for the Least Cost Routing Table.

Call Classification

with Class of Service

Maximum and Minimum

Characters to Collect

Dial Plan Tables

Number of the

route (dial tone

facility) from

Routing Tables

LongDistance

Troubleshooting

Nbx 100 900-0093-01 Nbx 100