3Com SuperStack 3 NBX Administrator's Manual page 231

Figure 79 Device Status Dialog Box
5 View the device status and make any necessary changes. Table 40
describes each Device Status field.
Table 40 Device Status Fields
Field
MAC Address
Name
Extension
Status
Software Version
Connecting and Managing Analog Devices
Purpose
The hardware address of this Single-Port Analog Terminal
Adapter (ATA) or of the port on a 4-Port Analog Terminal
Card.
NOTE: The ports on a 3C10114 4-Port Analog Terminal
Card have sequential MAC addresses.
The ports on a 3C10114C 4-Port Analog Terminal Card
have the same MAC address, and a Virtual Device
Number (VDN), in square brackets after it, provides a
unique identifying number to each port.
A name to help identify this ATA or port.
The extension number assigned to the device connected
to this ATA or ATC port.
The state of the ATA or ATC port when it was last
involved in a call. Devices send status messages to the
Call Processor every 30 seconds.
The software version downloaded to this ATA or 4-Port
Analog Terminal Card and used by the Digital Signal
Processors (DSPs).
231