3Com SuperStack 3 NBX Administrator's Manual page 213

Table 33 Auto Extension Configuration
Button Mapping Setting
for This Line
Not mapped to any telephone Extension of the
Not mapped to any telephone 500
Mapped to a button on the
Receptionist's Telephone (or
to a button on an Attendant
Console associated with the
Receptionist's telephone)
Table 32 Add Line Card Port Fields (continued)
Field
Disable Caller ID
Table 33 describes the behavior in Auto Extension Configuration:
Auto Extension
Setting Incoming Call Behavior
Receptionist's telephone rings. If no one answers, the call
Receptionist transfers to the call coverage point defined for the
Receptionist's telephone.
User Configuration > Users > User Settings > Call Forward
The transfer occurs after the number of rings specified for the
Receptionist's telephone.
User Configuration > Users > User Settings > Call Forward
Because the analog line is not mapped to any telephone, the
Time Out values (Open, Closed, Lunch, and Other) for the
Analog Line Card port are not used.
Device Configuration > Line Card Ports > Modify
Calls go directly to the Automated Attendant without ringing
any telephone.
Extension of the Receptionist's telephone rings. If no one answers, the call
Receptionist transfers to call coverage point defined for the Receptionist's
telephone.
User Configuration > Users > User Settings > Call Forward
The transfer occurs after:
■
■
Example: If the Time Out value for the Analog Line Card port
is 12 seconds, the equivalent number of rings is 2. If the Call
Forward settings for the receptionist's telephone is 4 rings,
then the call transfers after 6 rings.
Configuring and Managing Analog Line Card Ports
Purpose
Optionally enable or disable the caller ID function. This
also eliminates the approximately six-second delay on
the Auto Attendant.
The number of seconds specified on the Time Out line in
the Modify Line Card Port dialog box for the appropriate
time of day (Open, Closed, Lunch, Other):
Device Configuration > Line Card Ports > Modify
PLUS
The number of rings specified in the user settings for the
Receptionist's telephone.
User Configuration > Users > User Settings > Call Forward
213