3Com SuperStack 3 NBX Administrator's Manual page 251

Table 44 Group Parameters (continued)
Parameter
New Value
Changing BRI Group Membership
You may want to change the channel membership in a group to
accommodate changing needs.
To change group membership:
1 On the Digital Line Cards tab, from the Select Device Type pull-down list,
select ISDN BRI Group List and then click Apply.
2 Select the group for which you want to change membership.
3 Click Membership. The Manage Group Membership dialog box
(Figure 87) appears.
Figure 87 Manage Group Membership Dialog Box — BRI
4 To add a channel to the Member List, select the channel in the Non
Member List and click <<.
If you select the Copy Group Settings to Channels check box, the system
copies the settings of the selected group to each channel you add or
remove. If you do not select this check box, the channel settings are not
changed.
Configuring and Managing BRI-ST Digital Line Cards
ISDN BRI Options (continued)
N/A
251