3Com SuperStack 3 NBX Administrator's Manual page 217

Table 34 Device Status Dialog Box Fields (continued)
Field
Name
Extension
Status
Software Version
Dialog Refresh
Device Refresh
Reset Device
Time Last Seen
Error Count,
Error Code,
POTS State, POTS Init,
Ring State, Loop State,
Performance Data,
Debug Data,
Actor Data
Configuring and Managing Analog Line Card Ports
Purpose
A unique name for the port.
This name appears on the telephone display and in reports,
to help you identify the port.
Type an Extension Number or leave this box empty to use
Auto Discovery to assign the extension for line card ports.
By default, Auto Discovery begins at extension 750 for a
3-digit dial plan, or 7250 for a 4-digit dial plan.
The current state of the port.
Values: Online, Offline, Unknown
The version of software currently installed on the line card
and used by the Digital Signal Processors (DSPs).
Specifies how often to renew the information that appears
in the Status dialog box.
Forces the port to send a status message to the Call
Processor. (A port sends a status message to the Call
Processor every 30 seconds.)
Reboots the port, which resets communications with the
Call Processor and receives a new download of its operating
software.
If a call is in progress on the port, resetting the port
disconnects the call.
A time stamp that identifies the date and time the line card
port communicated with the Call Processor.
Advanced diagnostic data for use only by a qualified service
person.
217