Configuring The Nbx 1105 Attendant Console - 3Com SuperStack 3 NBX Administrator's Manual

186 C 3: D
HAPTER EVICE
Configuring the
NBX 1105
Attendant Console
C
ONFIGURATION
The NBX 1105 Attendant Console provides extended button mappings
and displays the current status of each extension. A receptionist typically
uses the Attendant Console to connect incoming calls to telephone
extensions.
Each item in the list of existing Attendant Consoles includes:
The associated extension number
■
The MAC address of the Attendant Console
■
The first and last name of the person associated with the extension
■
The device name of the Attendant Console
■
This section describes how to configure the Attendant Console manually.
Alternatively, you can use Auto Discovery to add and configure the device
automatically, and then use the manual configuration procedures in this
section to fine-tune your mappings.
If you autodiscover the Attendant Console, do so after you have
autodiscovered all telephones, Analog Terminal Adapters, and Analog
Terminal Cards.
This section covers these topics:
Adding an Attendant Console
■
Modifying an Attendant Console
■
Viewing Attendant Console Status
■
Removing an Attendant Console
■
Configuring Attendant Console Buttons
■
Changing Attendant Console IP Settings
■