3Com SuperStack 3 NBX Administrator's Manual page 397

Table 72 LUI Menu Items — Business and Basic Telephones
Option Name
1 View Settings
2 Set my IP
3 Set SubNMsk
Telephone Troubleshooting
Description
Dial 1 to access a menu in which you use the scroll
buttons to view these options:
MAC Address – MAC address of this telephone.
■
NCP MAC Address – MAC address of call processor
■
All Fs indicates that the telephone responds to any
Control Processor. This is the default setting.
SW Build Ident. – Revision of software running on
■
this telephone.
Serial # Rev – Serial number and hardware
■
revision of this telephone.
My IP Address – IP address of this telephone.
■
Subnet Mask – The IP mask applicable to this
■
subnetwork.
Gatwy IP Address – IP address of the default
■
gateway for this subnetwork.
NCP IP Address – IP address of the call processor with
■
which this telephone communicates.
To return to the main menu:
On the NBX Business Telephone, press Program.
■
On the NBX Basic Telephone, press MSG.
■
Lets you specify the IP address of this telephone.
When entering an IP address:
Use the key pad to enter digits 0–9.
■
Use the left and right soft keys to move the cursor left
■
or right.
If any of the fields within the IP address contain only
■
one or two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
Press the # key to commit your address change.
■
To exit without saving any changes:
■
On the NBX Business Telephone, press Program.
On the NBX Basic Telephone, press MSG.
To change a telephone back to its default setting, enter
all Fs for the NCP IP address.
Lets you specify the mask that is appropriate for this
subnetwork.
397