Add A License; Remove A License; Usage Report; Backing Up Licenses - 3Com SuperStack 3 NBX Administrator's Manual

Add a License

Remove a License

Usage Report

Backing Up Licenses

Restoring Backed Up
Licenses
Each NBX system includes a factory default license, tied to the system
serial number. On NBX 100 systems, the serial number is located on the
Call Processor backplane. On SuperStack 3 systems, the serial number is
located on the disk tray.
To configure the system to support new licenses, contact your 3Com
Voice Solutions dealer and provide the serial number. The dealer obtains a
new license key from 3Com Customer Support that enables the upgrade.
See the Help for procedures for adding a license to an NBX system.
The only license that you can remove from an NBX system is the disk
mirroring license which enables a SuperStack 3 NBX system to use two
disks in a mirrored configuration.
CAUTION: Refer to the Help for instructions on how to remove the disk
mirroring license. If you do not follow the correct procedure, you may not
be able to restart the SuperStack 3 NBX system.
The Usage Report displays, for each license installed on the NBX system,
the current number of devices in use for the license type and the
maximum number of devices allowed by that license.
You can make a backup of all licenses on your NBX system.
1 In the Operations > Licenses dialog box, click Backup Licenses.
2 Click Save, and choose a location to save the backup file.
3 Click Save.
You can restore all licenses from a previously created backup file.
1 In the Operations > Licenses dialog box, click Restore Licenses, and
browse to the location in which you saved the licenses backup file.
Alternatively, type full path to the license backup file in the Enter path to
restore license(s) on this system: text box.
2 Click Restore.
3 Respond to the confirmation prompt message that appears.
Licenses 383