3Com SuperStack 3 NBX Administrator's Manual page 86

86 C 2: D P
HAPTER IAL LAN
Table 18 VPIM Advanced Settings Dialog Box (continued)
Field
SMTP DATA response
SMTP DATA END response
SMTP RSET response
SMTP QUIT response
Purpose
Definition: The time that the local system waits for
an acknowledgement of a DATA command.
Detail: After the local system has specified all of the
recipient information, it sends a DATA command to
indicate that it is ready to send the mail message
itself. It then waits for the other site to acknowledge
the DATA command.
Minimum: 2 minutes
Default: 2 minutes
Definition: The time that the local system waits,
after sending the entire message, for an
acknowledgement from the other site that the
message was received.
Detail: After the local system sends the entire
message, it waits for a response from the other site
indicating acceptance of the message.
Minimum: 10 minutes
Default: 10 minutes
Definition: The time that the local system waits for
an acknowledgement of a RSET command.
Detail: Since the RSET command resets the SMTP
connection, the local system must wait for the other
site to reset itself and acknowledge.
Minimum: None defined
Default: 10 minutes
Definition: The time that the local system waits for
an acknowledgement of the QUIT command.
Detail: When the local system is finished
transmitting a message and wants to break the
connection, it sends a QUIT command. It then waits
for the other site to acknowledge the QUIT
command. When the acknowledgement arrives, or
when the time-out value is reached, whichever
comes first, the local system breaks the connection.
Minimum: None defined
Default: 5 minutes