Modifying A T1 Group - 3Com SuperStack 3 NBX Administrator's Manual

Modifying a T1 Group

Modifying Audio Controls
In a normal environment, you should not need to change the Audio
Controls from their default settings. If you have an issue with sound
quality and you cannot resolve it using the volume controls on the NBX
Telephones, contact your technical support representative.
CAUTION: Do not change your Audio Controls settings unless you are
instructed to do so by a qualified 3Com Technical Support representative.
A Digital Line Card group is one or more T1 channels that are assigned
the same characteristics, such as Channel Protocol and DS1 direction. This
section describes how to perform these actions:
Modifying a T1 Group
■
Changing T1 Group Membership
■
Removing a T1 Group
■
CAUTION: Modifying a T1 group disconnects any calls in process on any
channels associated with the group.
Modifying a T1 Group
You may want to modify a Digital Line Card group to change its name,
Auto Extension assignments, or other parameters. When you modify a
group, the changes affect all the Digital Line Cards assigned to that
group. To modify a Digital Line Card group:
1 return to the Digital Line Cards tab.
2 From the Select Device Type pull-down list, select one:
T1 Group List (for T1 DS1)
■
ISDN PRI Group List (for T1 ISDN PRI)
■
3 Click Apply.
4 Select the group that you want to modify.
5 Click Modify. The dialog box that appears depends on the Group List that
you selected.
Figure 129 shows the T1 DS1 Modify Group dialog box. Figure 130
shows the T1 ISDN PRI Modify Group dialog box.
Configuring and Managing T1 Digital Line Cards 311