Modifying A T1 Card - 3Com SuperStack 3 NBX Administrator's Manual

Modifying a T1 Card

These sections describes how to modify a T1 card that is already installed
in the system.
Modifying the T1 Card Name or Type
■
Modifying a T1 Span
■
Configuring Partial T1 Lines
■
Modifying Audio Controls
■
Modifying the T1 Card Name or Type
You can change the name of a Digital Line Card at any time. You can also
set the type to T1 or ISDN PRI.
To modify a T1 card name or type:
1 In the NBX NetSet - Main Menu window, click Device Configuration
(Figure 97).
Figure 123 NBX NetSet - Main Menu Window
2 In the Device Configuration window, click the Digital Line Cards tab. See
Figure 124.
Configuring and Managing T1 Digital Line Cards 303