Configuring Xerox Secure Access Unified Id System Authentication Settings - Xerox WorkCentre 7800 Series System Administrator Manual

Configuring Authentication Server Settings for LDAP
The printer uses the primary LDAP server for authentication, authorization, and personalization. The
primary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Server
page in CentreWare Internet Services. If you already have configured LDAP server settings, the
printer uses this server automatically when you select LDAP as the network authentication or
authorization method. The printer only uses alternate LDAP servers for authorization and
personalization when primary LDAP server communication fails.
1. On the Login Methods page, next to Authentication Servers, click Edit.
Under Authentication Type, select LDAP.
2.
3. Click Add New.
Configure LDAP server settings, then click Apply.
4.

Configuring Xerox Secure Access Unified ID System Authentication Settings

®
When Xerox Secure Access authentication is configured, users swipe a pre-programmed identification
card at the control panel. The printer compares the user credentials to the information stored on the
®
Xerox Secure Access server. To use Xerox
Unified ID System.
To configure access rights using Xerox Secure Access Unified ID System authentication:
®
• Install the Xerox
For details, see the Xerox Secure Access Unified ID System documentation.
• Enable the Authentication and Accounting Configuration Web service. For details, see
page 55.
• Format and configure identification cards.
• Connect your card reader to the USB Port.
• Set the login method to Xerox Secure Access - Unified ID System For details, see
Method on page 67.
®
• Configure Xerox
®
• Enable the Xerox
• If you enabled Personalization, configure LDAP server settings. For details, see
on page 51.
• Configure authorization settings. For details, see
The Login Methods page in CentreWare Internet Services provides links to authentication and
personalization configuration settings.
In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
1.
Click Login Methods.
2.
®
Secure Access, purchase and install the Xerox Secure Access
Secure Access authentication server software and configure it with user accounts.
Secure Access Setup settings.
Secure Access Web service. For details, see HTTP on page 55.
Authorization on page 77.
WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Security
HTTP on
Setting the Login
LDAP server settings
71