Installing The Ip Softphone 2050; Installing The Usb Headset Kit - Nortel 2050 User Manual

22 Chapter 3 Installing and setting up the IP Softphone 2050
The Nortel USB Audio Kit includes:
• USB Headset Adapter (desktop or mobile)
• Installation Guide (English and French)
• USB cord
Some kits also include a headset.
The Algo Analog Terminal Adapter (ATA) is a USB adapter that lets you use analog terminals
instead of headsets. With an Algo ATA users can, for example, use a cordless handset with their IP
Softphone 2050.

Installing the IP Softphone 2050

Refer to the IP Phones: Description, Installation, and Operation (553-3001-368) or consult your
system administrator.

Installing the USB Headset Kit

The IP Softphone 2050 supports a desktop USB headset adapter, as well as a mobile adapter.
To install the USB Headset Kit
1
Ensure that you have the proper system requirements as listed in
page 21.
2 Ask your system administrator to change settings, if necessary, to allow you to connect the IP
Softphone 2050 to the communication server.
3 If using the mobile adapter, connect the headset to the adapter. If using the desktop adapter,
you must:
• Connect the coiled lower cord to the headset cord with the Quick Disconnect connector
(make sure it is securely fastened).
• Connect the headset cord to the RJ9 jack on the adapter.
4 Connect the USB cable to the headset adapter and to one of the USB jacks on your computer
or USB hub.
The first time the headset adapter is plugged in, a delay occurs while the Windows operating
system configures the device and locates appropriate driver software. If the installation software
asks for the original Windows CD-ROM, insert the CD-ROM so that the Windows operating
system can locate drivers.
For more information about installing the IP Softphone 2050 software, contact your system
administrator.
NN40050-100 NN40050-100
Note: The IP Softphone 2050 is compatible with the Algo ATA. For
support, see www.algosolutions.com.
"Nortel USB Audio Kit" on