Connecting A Bluetooth Headset; Interaction Between Bluetooth Headset And Wired Headset - Nortel 1150E User Manual

Connecting a Bluetooth headset

Your IP Phone 1150E is equipped with a Bluetooth radio system to
support Bluetooth headsets. Before you can use a Bluetooth headset with
your phone, you must pair the two devices.
Pair the Bluetooth headset with your phone by selecting the pairing
function in the phone Tools Menu, while pressing the
the headset. You can also unpair your headset from your phone.
Author's note:
The proceeding section describing the pairing of a Bluetooth
Headset needs to be clarified; what is the procedure for pairing / unpairing
the headset? Follow up with Charles.
Interaction between Bluetooth headset and
wired headset
If you also connect a wired headset, the Bluetooth headset interacts with
the wired headset as follows:
• If no Bluetooth headset is paired, the wired headset works as normal.
Likewise, if a Bluetooth headset is paired with the set, but is not in
range, the wired headset works as normal.
• If a Bluetooth headset is paired, it always takes precedence over the
wired headset,
— The Bluetooth headset can work only if it is within range of the
phone. When the Bluetooth headset is in connecting range, the
Headset
headset is attached.
— If a Bluetooth headset moves into connecting range, one of the
following occurs:
- If a wired headset is not attached, the phone reports headset
attached.
- If a wired headset is already present, no headset attached
message is sent.
— If a Bluetooth headset moves out of connecting range
- If a wire headset is not attached, the phone reports headset
disconnected.
key controls the Bluetooth headset, whether a wired
Connecting the components
Connect button on
35