Show Cisp - Cisco Catalyst 3560X-24P Command Reference Manual

show cisp

show cisp
Use the show cisp privileged EXEC command to display CISP information for a specified interface.
Syntax Description
clients
interface interface-id
summary
| begin
| exclude
| include
expression
Command Modes
Global configuration
Command History Release
12.2(53)SE2
Examples
This example shows output from the show cisp interface command:
WS-C3750E-48TD#show cisp interface fast 0
CISP not enabled on specified interface
This example shows output from the show cisp summary command:
CISP is not running on any interface
Related Commands Command
dot1x credentials profile
cisp enable
Catalyst 3750-X and 3560-X Switch Command Reference
2-526
show cisp {[interface interface-id] | clients | summary} | {[begin | exclude | include} expression]}
(Optional) Display CISP client details
(Optional) Display CISP information about the specified interface. Valid
interfaces include physical ports and port channels.
(Optional) Display
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Description
Configure a profile on a supplicant switch
Enable Client Information Signalling Protocol (CISP)
OL-21522-02