Show Mac Address-Table Address - Cisco Catalyst 3560X-24P Command Reference Manual

show mac address-table address

show mac address-table address
Use the show mac address-table address user EXEC command to display MAC address table
information for the specified MAC address.
Syntax Description mac-address
interface interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table address command:
Switch# show mac address-table address 0002.4b28.c482
------------------------------------------
Vlan
----
All
Total Mac Addresses for this criterion: 1
Catalyst 3750-X and 3560-X Switch Command Reference
2-670
show mac address-table address mac-address [interface interface-id] [vlan vlan-id] [ | {begin |
exclude | include} expression]
Specify the 48-bit MAC address; the valid format is H.H.H.
(Optional) Display information for a specific interface. Valid interfaces
include physical ports and port channels.
(Optional) Display entries for the specific VLAN only. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0002.4b28.c482 STATIC
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Ports
-----
CPU
OL-21522-02