Show Eap - Cisco Catalyst 3560X-24P Command Reference Manual

show eap

show eap
Use the show eap privileged EXEC command to display Extensible Authentication Protocol (EAP)
registration and session information for the switch or for the specified port.
Syntax Description registrations
method name
transport name
sessions
credentials name
interface interface-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines When you use the show eap registrations privileged EXEC command with these keywords, the
command output shows this information:
•
•
•
Catalyst 3750-X and 3560-X Switch Command Reference
2-568
show eap {{registrations [method [name] | transport [name]]} | {sessions [credentials name
[interface interface-id] | interface interface-id | method name | transport name]}}
[credentials name | interface interface-id | transport name] [ | {begin | exclude | include}
expression]
Display EAP registration information.
(Optional) Display EAP method registration information.
(Optional) Display EAP transport registration information.
Display EAP session information.
(Optional) Display EAP method registration information.
(Optional) Display the EAP information for the specified port (including
type, stack member (stacking-capable switches only) module, and port
number).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
None—All the lower levels used by EAP and the registered EAP methods.
method name keyword—The specified method registrations.
transport name keyword—The specific lower-level registrations.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02