Switchport Private-Vlan - Cisco Catalyst 3560X-24P Command Reference Manual

switchport private-vlan

switchport private-vlan
Use the switchport private-vlan interface configuration command on the switch stack or on a standalone
switch to define a private-VLAN association for an isolated or community port or a mapping for a
promiscuous port. Use the no form of this command to remove the private-VLAN association or
mapping from the port.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description association
host
primary-vlan-id
secondary-vlan-id
mapping
add
remove
secondary-vlan-list
host-association
Defaults The default is to have no private-VLAN association or mapping configured.
Command Modes
Interface configuration
Command History Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
2-894
switchport private-vlan {association {host primary-vlan-id secondary-vlan-id | mapping
primary-vlan-id {add | remove} secondary-vlan-list} | host-association primary-vlan-id
secondary-vlan-id | mapping primary-vlan-id {add | remove} secondary-vlan-list}
no switchport private-vlan {association {host | mapping} | host-association | mapping
Define a private-VLAN association for a port.
Define a private-VLAN association for a community or isolated host port.
The VLAN ID of the private-VLAN primary VLAN. The range is from 2 to
1001 and 1006 to 4094.
The VLAN ID of the private-VLAN secondary (isolated or community) VLAN.
The range is from 2 to 1001 and 1006 to 4094.
Define private-VLAN mapping for a promiscuous port.
Associate secondary VLANs to the primary VLAN.
Clear the association between secondary VLANs and the primary VLAN.
One or more secondary (isolated or community) VLANs to be mapped to the
primary VLAN.
Define a private-VLAN association for a community or isolated host port.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02