Show Mac Address-Table Aging-Time - Cisco Catalyst 3560X-24P Command Reference Manual

show mac address-table aging-time

show mac address-table aging-time
Use the show mac address-table aging-time user EXEC command to display the aging time of a
specific address table instance, all address table instances on a specified VLAN or, if a specific VLAN
is not specified, on all VLANs.
Syntax Description vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines If no VLAN number is specified, the aging time for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table aging-time command:
Switch> show mac address-table aging-time
Vlan
----
1
This is an example of output from the show mac address-table aging-time vlan 10 command:
Switch> show mac address-table aging-time vlan 10
Vlan
----
10
Catalyst 3750-X and 3560-X Switch Command Reference
2-672
show mac address-table aging-time [vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Display aging time information for a specific VLAN. The range
is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Aging Time
----------
300
Aging Time
----------
300
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02