Show Cisp - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show cisp

Use the show cisp privileged EXEC command to display CISP information for a specified interface.
Syntax Description
clients
interface interface-id
summary
Command Modes Global configuration
Command History Release
12.2(53)SE2
Examples This example shows output from the show cisp interface command:
WS-C3750E-48TD#show cisp interface fast 0
CISP not enabled on specified interface
This example shows output from the show cisp summary command:
CISP is not running on any interface
Related Commands Command
dot1x credentials profile
cisp enable
OL-29704-01
show cisp {[interface interface-id] | clients | summary}
(Optional) Display CISP client details
(Optional) Display CISP information about the specified interface. Valid
interfaces include physical ports and port channels.
(Optional) Display
Modification
This command was introduced.
Description
Configure a profile on a supplicant switch
Enable Client Information Signalling Protocol (CISP)
Catalyst 3750-X and 3560-X Switch Command Reference
show cisp
2-579