Nmsp - Cisco Catalyst 3560X-24P Command Reference Manual

nmsp

nmsp
Use the nmsp global configuration command to enable Network Mobility Services Protocol (NMSP) on
the switch. Use the no form of this command to return to the default setting.
Syntax Description
enable
notification interval
attachment
location
interval-seconds
Defaults
NMSP is disabled.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines
Use the nmsp global configuration command to enable the switch to send NMSP location and
attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples
This example shows how to enable NMSP on a switch and set the location notification time to 10
seconds:
Switch(config)# nmsp enable
Switch(config)# nmsp notification interval location 10
Related Commands Command
clear nmsp statistics
nmsp attachment suppress
show nmsp
Catalyst 3750-X and 3560-X Switch Command Reference
2-418
nmsp {enable | {notification interval {attachment | location} interval-seconds}}
no nmsp {enable | {notification interval {attachment | location} interval-seconds}}
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Enable the NMSP features on the switch.
Specify the NMSP notification interval.
Specify the attachment notification interval.
Specify the location notification interval.
Duration in seconds before a switch sends the MSE the location or
attachment updates. The range is 1 to 30; the default is 30.
Description
Clears the NMSP statistic counters.
Suppresses reporting attachment information from a specified
interface.
Displays the NMSP information.
OL-21522-02