Cisco Catalyst 3560X-24P Command Reference Manual page 352

lacp port-priority
Examples This example shows how to configure the LACP port priority on a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# lacp port-priority 1000
You can verify your settings by entering the show lacp [channel-group-number] internal privileged
EXEC command.
Related Commands Command
channel-group
lacp system-priority
show lacp
internal
Catalyst 3750-X and 3560-X Switch Command Reference
2-320
[channel-group-number]
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Assigns an Ethernet port to an EtherChannel group.
Configures the LACP system priority.
Displays internal information for all channel groups or for
the specified channel group.
OL-21522-02