Cisco Catalyst 3560X-24P Command Reference Manual page 596

show dot1x
SuppTimeout
ReAuthPeriod
ReAuthMax
MaxReq
TxPeriod
RateLimitPeriod
Dot1x Authenticator Client List Empty
This is an example of output from the show dot1x interface interface-id details commmand when a port
is assigned to a guest VLAN and the host mode changes to multiple-hosts mode:
Switch# show dot1x interface gigabitethernet1/0/1 details
Dot1x Info for GigabitEthernet1/0/1
-----------------------------------
PAE
PortControl
ControlDirection
HostMode
ReAuthentication
QuietPeriod
ServerTimeout
SuppTimeout
ReAuthPeriod
ReAuthMax
MaxReq
TxPeriod
RateLimitPeriod
Guest-Vlan
Dot1x Authenticator Client List Empty
Port Status
Authorized By
Operational HostMode
Vlan Policy
This is an example of output from the show dot1x interface interface-id statistics command.
describes the fields in the display.
Switch> show dot1x interface gigabitethernet1/0/2 statistics
Dot1x Authenticator Port Statistics for GigabitEthernet1/0/2
--------------------------------------------
RxStart = 0
RxInvalid = 0
TxReq = 2
RxVersion = 2
Table 2-32
Field
RxStart
RxLogoff
RxResp
RxRespID
Catalyst 3750-X and 3560-X Switch Command Reference
2-564
= 30
= 3600 (Locally configured)
= 2
= 2
= 30
= 0
= AUTHENTICATOR
= AUTO
= Both
= SINGLE_HOST
= Enabled
= 60
= 30
= 30
= 3600 (Locally configured)
= 2
= 2
= 30
= 0
= 182
= AUTHORIZED
= Guest-Vlan
= MULTI_HOST
= 182
RxLogoff = 0 RxResp = 1
RxLenErr = 0 RxTotal = 2
TxReqID = 132 TxTotal = 134
LastRxSrcMAC = 00a0.c9b8.0072
show dot1x statistics Field Descriptions
Description
Number of valid EAPOL-start frames that have been received.
Number of EAPOL-logoff frames that have been received.
Number of valid EAP-response frames (other than response/identity frames) that
have been received.
Number of EAP-response/identity frames that have been received.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
RxRespID = 1
Table 2-32
OL-21522-02