Cisco Catalyst 3560X-24P Command Reference Manual page 554

show boot
Related Commands Command
boot auto-copy-sw
boot
auto-download-sw
boot config-file
boot enable-break
boot manual
boot
private-config-file
boot system
Catalyst 3750-X and 3560-X Switch Command Reference
2-522
Description
Enables the automatic upgrade (auto-upgrade) process to automatically
upgrade a switch in version-mismatch (VM) mode.
This command is available only on stacking-capable switches.
Specifies the software image to use in the auto-upgrade process.
This command is available only on stacking-capable switches.
Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the system configuration.
Enables interrupting the automatic boot process.
Enables manually booting the switch during the next boot cycle.
Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the private configuration.
Specifies the Cisco IOS image to load during the next boot cycle.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02