Show Controllers Ethernet Phy Macsec - Cisco Catalyst 3560X-24P Command Reference Manual

show controllers ethernet phy macsec

show controllers ethernet phy macsec
Use the show controllers ethernet phy macsec privileged EXEC command to display the internal
Media Access Control Security (MACsec) counters or registers on the switch or the specified interface.
Syntax Description interface-id
counters
registers
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines The displayed information is useful s for Cisco technical support representatives troubleshooting the
switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example output from the show controllers ethernet phy macsec counters command:
Switch# show controllers ethernet g1/0/1 phy macsec counters
GigabitEthernet1/0/1 (gpn: 1, port-number: 1)
-----------------------------------------------------------
========== Active RX SA ==========
ILU Entry
SCI
AN
NextPN
Decrypt Key
---------- RX SA Stats ----------
IGR_HIT
IGR_OK
IGR_UNCHK
IGR_DELAY
Catalyst 3750-X and 3560-X Switch Command Reference
2-546
show controllers ethernet [interface-id] phy macsec {counters | registers} [ | {begin | exclude |
include} expression]
(Optional) The physical interface.
Displays the status of the internal counters on the switch physical layer device
(PHY) for the device or the interface.
Displays the status of the internal registers on the switch PHY for the device or
the interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 1
: 0x1B2140EC4C0000
: 0x0000
: 0x0013
: 0x1E902BE3AF08549BAC995474C5F55526
: 0xE
: 0xE
: 0x0
: 0x0
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02