Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Examples
This is an example of output from the show lacp counters user EXEC command.
the fields in the display.
Switch> show lacp counters
Port
---------------------------------------------------------------------
Channel group:1
Gi2/0/1
Gi2/0/2
Table 2-38
Field
LACPDUs Sent and Recv
Marker Sent and Recv
Marker Response Sent and Recv
LACPDUs Pkts and Err
This is an example of output from the show lacp internal command:
Switch> show lacp 1 internal
Flags:
Channel group 1
Port
Gi2/0/1
Gi2/0/2
Table 2-39
Table 2-39
show lacp internal Field Descriptions
Field
State
LACP Port Priority
OL-21522-02
LACPDUs
Sent
Recv
Sent
19
10
14
6
show lacp counters Field Descriptions
S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode
LACP port
Flags
State
Priority
SA
bndl
SA
bndl
describes the fields in the display:
Description
State of the specific port. These are the allowed values:
– —Port is in an unknown state.
•
•
bndl—Port is attached to an aggregator and bundled with other ports.
•
susp—Port is in a suspended state; it is not attached to any aggregator.
•
hot-sby—Port is in a hot-standby state.
indiv—Port is incapable of bundling with any other port.
•
indep—Port is in an independent state (not bundled but able to switch data traffic. In this
•
case, LACP is not running on the partner port).
down—Port is down.
•
Port priority setting. LACP uses the port priority to put ports s in standby mode when there is
a hardware limitation that prevents all compatible ports from aggregating.
Marker
Marker Response
Recv
Sent
Recv
0
0
0
0
0
0
Description
The number of LACP packets sent and received by a port.
The number of LACP marker packets sent and received by a port.
The number of LACP marker response packets sent and received
by a port.
The number of unknown and illegal packets received by LACP
for a port.
P - Device is in Passive mode
Admin
Key
32768
0x3
32768
0x3
Catalyst 3750-X and 3560-X Switch Command Reference
Table 2-38
LACPDUs
Pkts Err
0
0
0
0
Oper
Port
Port
Key
Number
State
0x3
0x4
0x3D
0x3
0x5
0x3D
show lacp
describes
2-653