Show Mka Statistics - Cisco Catalyst 3560X-24P Command Reference Manual

Cisco ios release 12.2(55)se
Hide thumbs Also See for Catalyst 3560X-24P:
Table of Contents

Advertisement

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show mka statistics

To display global MACsec Key Agreement (MKA) Protocol statistics and error counters from active and
previous MKA sessions, use the show mka statistics privileged EXEC command
Syntax Description
interface interface-id
port-id port-id
local-sci sci
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of the show mka statistics command output:
SWitch# show mka statistics
MKA Global Statistics
=====================
MKA Session Totals
Secured.................... 32
Reauthentication Attempts.. 31
Deleted (Secured).......... 1
Keepalive Timeouts......... 0
CA Statistics
OL-21522-02
show mka statistics [interface interface-id port-id port-id] | [local-sci sci]} [ | {begin | exclude |
include} expression]
(Optional) Displays statistics for an MKA session on an interface. Only
physical interfaces are valid.
Displays a summary of active MKA sessions running on the interface with
the specified port ID. To see the port ID, enter the show mka session or show
mka session interface interface-id command. Port identifier values begin at
2 and monotonically increase for each new active session using a virtual port
on the same physical interface.
(Optional) Shows statistics for an MKA session identified by its Local
TX-SCI. To determine the Local TX-SCI for a session, enter the show mka
session detail command. The SCI must be 8 octets (16 hexadecimal digits)
long.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show mka statistics
2-699

Advertisement

Table of Contents
loading

Table of Contents