Show Boot - Cisco Catalyst 3560X-24P Command Reference Manual

show boot

show boot
Use the show boot privileged EXEC command to display the settings of the boot environment variables.
Syntax Description
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show boot command for all stack members.
each field in the display. An example image_name is c3750x-universal-mz.122-53.SE2
Switch# show boot
BOOT path-list
Config file
Private Config file : flash:/private-config.text
Enable Break
Manual Boot
HELPER path-list
Auto upgrade
Auto upgrade path
-------------------
Switch 2
-------------------
BOOT path-list
Config file
Private Config file : flash:/private-config.text
Enable Break
Manual Boot
HELPER path-list
Auto upgrade
Auto upgrade path
-------------------
<output truncated>
Catalyst 3750-X and 3560-X Switch Command Reference
2-520
show boot [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: flash: image_name .bin
: flash:/config.text
: no
: yes
:
: yes
:
: flash: image_name .bin
: flash:/config.text
: no
: yes
:
: no
:
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Table 2-27 describes
OL-21522-02