Debug Platform Forw-Tcam - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands

debug platform forw-tcam

Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding
hardware memory manager. Use the no form of this command to disable debugging.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description adjustment
allocate
audit
error
move
read
write
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines If you do not specify a keyword, all forwarding hardware manager debug messages appear.
The undebug platform forw-tcam command is the same as the no debug platform forw-tcam
command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands Command
show debugging
OL-21522-02
debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
(Optional) Display hardware manager adjustment debug messages.
(Optional) Display hardware manager allocation debug messages.
(Optional) Display hardware manager audit messages.
(Optional) Display hardware manager error messages.
(Optional) Display hardware manager move messages.
(Optional) Display hardware manager read messages.
(Optional) Display hardware manager write messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 3750-X and 3560-X Switch Command Reference
debug platform forw-tcam
B-47