Show Link State Group - Cisco Catalyst 3560X-24P Command Reference Manual

show link state group

show link state group
Use the show link state group privileged EXEC command to display the link-state group information.
Syntax Description
number
detail
| begin
| exclude
| include
expression
Defaults
There is no default.
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines Use the show link state group command to display the link-state group information. Enter this
command without keywords to display information about all link-state groups. Enter the group number
to display information specific to the group.
Enter the detail keyword to display detailed information about the group. The output for the show link
state group detail command displays only those link-state groups that have link-state tracking enabled
or that have upstream or downstream interfaces (or both) configured. If there is no link-state
configuration for a group, the group is not shown as enabled or disabled.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Catalyst 3750-X and 3560-X Switch Command Reference
2-656
show link state group [number] [detail] [ | {begin | exclude | include} expression]
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
(Optional) Number of the link-state group.
(Optional) Specify that detailed information appears.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
OL-21522-02