Clear Ip Arp Inspection Statistics - Cisco Catalyst 3560X-24P Command Reference Manual

clear ip arp inspection statistics

clear ip arp inspection statistics
Use the clear ip arp inspection statistics privileged EXEC command on the switch stack or on a
standalone switch to clear the dynamic Address Resolution Protocol (ARP) inspection statistics.
Syntax Description vlan vlan-range
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Examples
This example shows how to clear the statistics for VLAN 1:
Switch# clear ip arp inspection statistics vlan 1
You can verify that the statistics were deleted by entering the show ip arp inspection statistics vlan 1
privileged EXEC command.
Related Commands Command
show inventory
Catalyst 3750-X and 3560-X Switch Command Reference
2-96
clear ip arp inspection statistics [vlan vlan-range]
(Optional) Clear statistics for the specified VLAN or VLANs.
You can specify a single VLAN identified by VLAN ID number, a range of
VLANs separated by a hyphen, or a series of VLANs separated by a comma.
The range is 1 to 4094.
Modification
This command was introduced.
statistics
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Displays statistics for forwarded, dropped, MAC validation failure, and
IP validation failure packets for all VLANs or the specified VLAN.
OL-21522-02