Boot Helper-Config-File - Cisco Catalyst 3560X-24P Command Reference Manual

boot helper-config-file

boot helper-config-file
Use the boot helper-config-file global configuration command on the switch stack or on a standalone
switch to specify the name of the configuration file to be used by the Cisco IOS helper image. If this is
not set, the file specified by the CONFIG_FILE environment variable is used by all versions of Cisco
IOS that are loaded. Use the no form of this command to return to the default setting.
Syntax Description filesystem:
/file-url
Defaults
No helper configuration file is specified.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see
Related Commands Command
show boot
Catalyst 3750-X and 3560-X Switch Command Reference
2-74
boot helper-config-file filesystem:/file-url
no boot helper-config file
Modification
This command was introduced.
Appendix A "Catalyst 3750-X and 3560-X Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Alias for a flash file system. Use flash: for the system board flash
device.
The path (directory) and helper configuration file to load.
OL-21522-02