Cisco Catalyst 3560X-24P Command Reference Manual page 629

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Port
-------
Gi2/0/3
Port
-------
Gi2/0/3
Port
-------
Gi2/0/3
This is an example of output from the show interfaces tengigabitethernet interface-id transceiver
detail command:
Switch# show interfaces tengigabitethernet1/0/1 transceiver detail
Transceiver monitoring is disabled for all interfaces.
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ------------------ ---------- --------- --------- ---------
Te1/0/1 26.8 70.0 60.0 5.0 0.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- --------------- ---------- --------- --------- ---------
Te1/0/1 3.15 3.63 3.63 2.97 2.97
High Alarm High Warn Low Warn Low Alarm
Current Threshold Threshold Threshold Threshold
Port (milliamperes) (mA) (mA) (mA) (mA)
--------- ----------------- ---------- --------- --------- ---------
Te1/0/1 5.0 16.3 15.3 3.9 3.2
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ----------------- ---------- --------- --------- ---------
Te1/0/1 -1.9 1.0 0.5 -8.2 -8.5
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
------- ----------------- ---------- --------- --------- ---------
Te1/0/1 -1.4 1.0 0.5 -14.1 -15.0
This is an example of output from the show interfaces tengigabitethernet interface-id transceiver
properties command:
Switch# show interfaces tengigabitethernet1/0/1 transceiver properties
Transceiver monitoring is disabled for all interfaces.
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
OL-21522-02
High Alarm
Current Threshold
(milliamperes) (mA)
----------------- ----------
31.0 84.0
Optical High Alarm
Transmit Power Threshold
(dBm) (dBm)
----------------- ----------
-0.0 ( -0.0) -0.0
Optical High Alarm
Receive Power Threshold
(dBm) (dBm)
----------------- ----------
N/A ( -0.0) -- -0.0
High Warn Low Warn Low Alarm
Threshold Threshold Threshold
(mA) (mA) (mA)
--------- --------- ---------
70.0 4.0
High Warn Low Warn Low Alarm
Threshold Threshold Threshold
(dBm) (dBm) (dBm)
--------- --------- ---------
-0.0 -0.0
High Warn Low Warn Low Alarm
Threshold Threshold Threshold
(dBm) (dBm) (dBm)
--------- --------- ---------
-0.0 -0.0
Catalyst 3750-X and 3560-X Switch Command Reference
show interfaces
2.0
-0.0
-0.0
2-597