ipv6 traffic-filter
Examples
This example filters inbound IPv6 traffic on an IPv6-configured interface as defined by the access list
named cisco:
Switch (config)# interface gigabitethernet1/0/1
Switch(config-if)# no switchport
Switch(config-if)# ipv6 address 2001::/64 eui-64
Switch(config-if)# ipv6 traffic-filter cisco in
Related Commands
Command
ipv6 access-list
show ipv6 access-list
show ipv6 interface
Catalyst 3750-X and 3560-X Switch Command Reference
2-314
Chapter 2
Description
Defines an IPv6 access list and sets deny or permit conditions for the
defined access list.
Displays the contents of all current IPv6 access lists.
Displays the usability status of interfaces configured for IPv6.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02