Clear Vtp Counters - Cisco Catalyst 3560X-24P Command Reference Manual

clear vtp counters

clear vtp counters
Use the clear vtp counters privileged EXEC command on the switch stack or on a standalone switch to
clear the VLAN Trunking Protocol (VTP) and pruning counters.
Syntax Description This command has no arguments or keywords.
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Examples
This example shows how to clear the VTP counters:
Switch# clear vtp counters
You can verify that information was deleted by entering the show vtp counters privileged EXEC
command.
Related Commands Command
show vtp
Catalyst 3750-X and 3560-X Switch Command Reference
2-116
clear vtp counters
Modification
This command was introduced.
Description
Displays general information about the VTP management domain, status,
and counters.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02