Cisco Catalyst 3560X-24P Command Reference Manual page 315

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
•
•
Examples To disable sticky ARP:
Switch(config)# no ip sticky-arp
You can verify your settings by using the show arp privileged EXEC command.
Related Commands Command
arp
show arp
OL-21522-02
Use the no sticky-arp global configuration command to disable sticky ARP on the switch.
Use the no sticky-arp interface configuration command to disable sticky ARP on an interface when
sticky ARP is disabled on the switch.
Description
Adds a permanent entry in the ARP table. For syntax information,
see the Cisco IOS IP Addressing Services Command Reference,
Release 12.4 > ARP Commands.
Displays the entries in the ARP table. For syntax information, see the
Cisco IOS IP Addressing Services Command Reference,
Release 12.4 > ARP Commands.
Catalyst 3750-X and 3560-X Switch Command Reference
ip sticky-arp (global configuration)
2-283