Shutdown Vlan - Cisco Catalyst 3560X-24P Command Reference Manual

shutdown vlan

shutdown vlan
Use the shutdown vlan global configuration command on the switch stack or on a standalone switch to
shut down (suspend) local traffic on the specified VLAN. Use the no form of this command to restart
local traffic on the VLAN.
Syntax Description
vlan-id
Defaults No default is defined.
Command Modes
Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines
The shutdown vlan command does not change the VLAN information in the VTP database. The
command shuts down local traffic, but the switch still advertises VTP information.
Examples
This example shows how to shut down traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Related Commands Command
shutdown
(config-vlan mode)
Catalyst 3750-X and 3560-X Switch Command Reference
2-784
shutdown vlan vlan-id
no shutdown vlan vlan-id
ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as
default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
Modification
This command was introduced.
Description
Shuts down local traffic on the VLAN when in config-VLAN mode (accessed
by the vlan vlan-id global configuration command).
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02