Clear Spanning-Tree Counters - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

clear spanning-tree counters

Use the clear spanning-tree counters privileged EXEC command on the switch stack or on a standalone
switch to clear the spanning-tree counters.
Syntax Description interface interface-id
Defaults No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines If the interface-id is not specified, spanning-tree counters are cleared for all interfaces.
Examples
This example shows how to clear spanning-tree counters for all interfaces:
Switch# clear spanning-tree counters
Related Commands Command
show spanning-tree
OL-21522-02
clear spanning-tree counters [interface interface-id]
(Optional) Clear all spanning-tree counters on the specified interface. Valid
interfaces include physical ports, VLANs, and port channels. The VLAN
range is 1 to 4094. The port-channel range is 1 to 48.
Modification
This command was introduced.
Description
Displays spanning-tree state information.
Catalyst 3750-X and 3560-X Switch Command Reference
clear spanning-tree counters
2-113