Cisco Catalyst 3560X-24P Command Reference Manual page 724

show mka default-policy
Replay Protection...... YES
Replay Window Size..... 0
Confidentiality Offset. 0
Applied Interfaces...
GigabitEthernet1/0/5
This is sample output of the show mka default-policy sessions command:
Switch# show mka default-policy sessions
Summary of All Active MKA Sessions with MKA Policy "*DEFAULT POLICY*"...
Interface Peer-RxSCI
Port-ID
================================================================================
...
Table 2-40
Field
Interface
Port-ID
Peer-RxSCI
Local-TxSCI
Policy-Name
Key Svr Status
Audit-Session-ID
CKN
Related Commands Command
mka default-policy
Catalyst 3750-X and 3560-X Switch Command Reference
2-692
Policy-Name
Local-TxSCI Key-Svr Status
show mka default-policy sessions Output Fields
Description
The short name of the physical interface on which the MKA session is active.
The Port-ID used in the Local-TxSCI.
The MAC address of the interface of the peer concatenated with the peer 16-bit
Port-ID.
The MAC address of the physical interface concatenated with the 16-bit
Port-ID.
The name of the policy used at session start to set initial configuration values.
The key server: has value 'Y' for YES if the MKA session is the key server,
otherwise, 'N' for NO.
The session ID.
Connectivity association key (CAK) name
Description
Applies the MKA Protocol default policy on the interface.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Audit-Session-ID
CKN
OL-21522-02