Renew Ip Dhcp Snooping Database - Cisco Catalyst 3560X-24P Command Reference Manual

renew ip dhcp snooping database

renew ip dhcp snooping database
Use the renew ip dhcp snooping database privileged EXEC command on the switch stack or on a
standalone switch to renew the DHCP snooping binding database.
Syntax Description flash[number]:/filen
ame
ftp://user:password
@host/filename
nvram:/filename
rcp://user@host/file
name
tftp://host/filename
validation none
Defaults No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
If you do not specify a URL, the switch tries to read the file from the configured URL.
Examples
This example shows how to renew the DHCP snooping binding database without checking CRC values
in the file:
Switch# renew ip dhcp snooping database validation none
You can verify your settings by entering the show ip dhcp snooping database privileged EXEC
command.
Catalyst 3750-X and 3560-X Switch Command Reference
2-484
renew ip dhcp snooping database [{flash[number]:/filename | ftp://user:password@host/filename
| nvram:/filename | rcp://user@host/filename | tftp://host/filename}] [validation none]
(Optional) Specify that the database agent or the binding file is in the flash
memory. Use the number parameter to specify the stack member number of the
stack master. The range for number is 1 to 9.
(Optional) Specify that the database agent or the binding file is on an FTP
server.
(Optional) Specify that the database agent or the binding file is in the NVRAM.
(Optional) Specify that the database agent or the binding file is on a Remote
Control Protocol (RCP) server.
(Optional) Specify that the database agent or the binding file is on a TFTP
server.
(Optional) Specify that the switch does not verify the cyclic redundancy check
(CRC) for the entries in the binding file specified by the URL.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02