Cisco Catalyst 3560X-24P Command Reference Manual page 186

dot1x
Examples This example shows how to globally enable IEEE 802.1x authentication on a switch:
Switch(config)# dot1x system-auth-control
This example shows how to globally enable the optional guest VLAN behavior on a switch:
Switch(config)# dot1x guest-vlan supplicant
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command
dot1x critical (global
configuration)
dot1x guest-vlan
dot1x port-control
show dot1x
interface-id]
Catalyst 3750-X and 3560-X Switch Command Reference
2-154
Description
Configures the parameters for the inaccessible authentication bypass
feature on the switch.
Enables and specifies an active VLAN as an IEEE 802.1x guest VLAN.
Enables manual control of the authorization state of the port.
[interface Displays IEEE 802.1x status for the specified port.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02