Reset - Cisco Catalyst 3560X-24P Command Reference Manual

reset

reset
Use the reset boot loader command to perform a hard reset on the system. A hard reset is similar to
power-cycling the switch, clearing the processor, registers, and memory.
Syntax Description This command has no arguments or keywords.
Command Modes
Boot loader
Command History Release
12.2(53)SE2
Examples This example shows how to reset the system:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Related Commands Command
boot
Catalyst 3750-X and 3560-X Switch Command Reference
A-22
reset
Modification
This command was introduced.
Description
Loads and boots an executable image and enters the command-line interface.
Appendix A Catalyst 3750-X and 3560-X Switch Boot Loader Commands
OL-21522-02